P0010 Camshaft Position Actuator "A" Circuit (Bank 1)
The engine computer sees an electrical fault in the circuit of the intake camshaft timing actuator (variable valve timing solenoid) on bank 1.
Common causes
- Faulty camshaft timing (VVT) solenoid
- Damaged wiring or corroded connector at the solenoid
- Open or shorted control circuit
- Engine control module driver fault (rare)
Symptoms
- Check engine light
- Rough idle or stalling
- Reduced power and fuel economy
What to check
- Inspect the solenoid connector and wiring for damage
- Measure solenoid resistance and compare with the service value
- Command the solenoid with a scan tool and listen for clicking
Manufacturers may add their own detail to generic codes. If your vehicle shows a different description for P0010, follow the service information for that make and model.
Related codes
- P0011 Camshaft Position "A" - Timing Over-Advanced or System Performance (Bank 1)
- P0012 Camshaft Position "A" - Timing Over-Retarded (Bank 1)
- P0013 Camshaft Position "B" Actuator Circuit (Bank 1)
- P0014 Camshaft Position "B" - Timing Over-Advanced or System Performance (Bank 1)
- P0016 Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor A)
- P0017 Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor B)